Yardcare V100 Robot Lawnmower (Dark Grey)

Does the Yardcare V100 need boundary cables installed around the garden?

No. This is one of the key differences between the V100 and older-style robot mowers. There are no perimeter cables to bury or stake into the ground. The mower uses a high-definition camera and AI visual sensors to identify where the lawn ends and where non-grass surfaces begin. Two 5-metre magnetic wires are included in the box, but these are only used if you want to create specific no-mow zones for example, around a flower bed or children's play area. Simply lay them on the ground and the mower avoids those areas automatically.

What is the maximum lawn size the V100 can handle?

The V100 is designed for lawns up to 150m². It is specifically built for smaller gardens where a compact, low-maintenance solution is needed. If your lawn is significantly larger than 150m², this model is not the right fit. The mower works best on clearly defined grass areas with established edges. It will stop approximately 10 - 20cm from the lawn edge, leaving a narrow strip uncut near borders.

Can the mower be used at night or in the rain?

No to both. The navigation system relies on a camera that requires sufficient natural daylight to function accurately. Using it at night would compromise its ability to detect obstacles and identify lawn boundaries. It is also equipped with a rain sensor that automatically halts operation when rainfall is detected. Mowing wet grass produces an uneven cut and can damage the lawn surface, so this is a sensible built-in limitation rather than a drawback.

What happens if the grass is too long before the first use?

If grass height exceeds 65mm the mower's camera may interpret it as an obstacle and stop rather than cut through it. For first-time use on an overgrown lawn, it is recommended to do one manual cut first to bring the grass below 65mm. After that initial cut the V100 can take over and maintain the lawn on a regular basis. Several owners use it every two days to keep the lawn consistently neat without ever letting it get too long.

How long does the battery last and how long does it take to recharge?

The V100 uses an 18V 4.0Ah detachable lithium battery. Recharge time from flat is approximately 3 hours. Runtime is sufficient to complete a full mow of a 150m² lawn in a single charge according to customer reviews. The battery is detachable, meaning you can remove it for indoor charging if needed. The mower also returns automatically to its charging base when the battery runs low during operation.

Is the V100 suitable for lawns with slopes or uneven ground?

Yes. The mower handles slopes up to 20°. To put that in context, a 20° incline is a fairly steep residential garden slope the kind you would notice when walking across it. Customer reviews confirm it manages sloped areas and navigates around raised stone edges without becoming stuck or veering off course. It is not suitable for extremely rough terrain, wasteland or areas without established grass such as gravel or bare soil.

How do you set up no-mow zones and how well do they work?

The box includes two magnetic wires each 5 metres long. To create a no-mow zone you simply lay the wire on the ground around the area you want to protect a flower bed, a pond edge, a patio border. No burying or staking is required. The mower detects the magnetic field and automatically steers away from that area. Owners report this works reliably for protecting garden furniture, plant pots and children's play equipment.

What are the cutting height options and how do you adjust them?

There are 5 cutting height positions ranging from 20mm at the lowest to 60mm at the highest. Adjustment is straightforward and does not require tools. The 16cm cutting width means it covers ground efficiently on each pass. Three blades are fitted as standard and three spare replacement blades are included in the box. Keeping blades sharp is important for a clean cut and having spares included from day one is a practical touch that avoids an early additional purchase.