Flymo FLY079 EasiLife Robotic House (Grey, Single)

Which Flymo models is this robotic house compatible with?

The house is confirmed compatible with all Flymo EasiLife and EasiLife GO models. It has also been used successfully with the McCulloch S400 a model from the same parent company, Husqvarna Group. However, buyers using non-Flymo branded mowers should check headroom carefully, as clearance between the mower roof and the shelter ceiling is tight. One McCulloch user reported superficial scratches on the top of their mower after fitting the shelter too low to the ground.

Does the robotic house lock onto the charging base station?

No the house does not lock or clip directly onto the charging base station. It is a separate unit that sits over the top of the station and anchors into the ground around it. Some buyers have noted mild disappointment with this, as they expected a more integrated connection. That said, it still functions effectively as a weather shelter and stays in place during normal use.

How difficult is it to install?

Installation is straightforward. No tools are required and no assembly is needed before fitting. The house simply places over the existing charging station. All 8 customers who mentioned installation in their reviews described it as easy. One important note: do not push the anchor stakes too far into the ground. If the house sits too low, the mower may catch on the roof edge as it drives in and out, potentially causing scratches or even getting snagged.

Does the surface need to be level for the house to work properly?

Yes a level surface is important. The clearance between the top of the mower and the interior roof of the house is limited. On uneven ground, one side of the mower may sit higher than the other, reducing that clearance further. Multiple buyers have flagged this as something to check before installation. If your charging station is on a slight slope, you may need to level the ground first to avoid the mower catching on the roof.

Can I still access the mower's control panel when the house is fitted?

Yes. The house features an opening hood specifically designed for this purpose. The lid lifts up to give you direct access to the mower's control panel without needing to remove the shelter. This makes it easy to adjust mowing schedules, check the mower's status or operate it manually. It's a practical design detail that makes day-to-day use much less frustrating than a fixed-roof alternative would be.

What is the house made from and how durable is it?

The house is made from plastic and weighs 10kg. It is manufactured in the Czech Republic by Husqvarna Group Ltd. Buyers who have had it for extended periods report it holding up well in all weather conditions. The grey colour and plastic construction are designed to withstand outdoor exposure. It comes with a 2-year manufacturer warranty, which provides some reassurance about long-term durability.

Is the price justified given it is a plastic shelter?

This is the most common concern in customer reviews. Of 26 customers who mentioned value for money, 20 felt the price was high for a plastic cover. At £97.99 (RRP £115.99), many buyers acknowledge it is expensive. However, the majority still bought it and rated it positively particularly people who had invested £600 or more in a robotic mower and wanted to protect that investment. One buyer noted that a friend used a £20 dog kennel as an alternative, so cheaper DIY solutions do exist.

Does the house protect the charging station as well as the mower?

Yes. Because the house fits over the entire charging station base, both the mower and the docking electronics are sheltered from rain and the elements. This is practically important one customer reported that using their mower without the cover for a period led to a fault developing in the docking station, which then needed to be replaced under warranty. Keeping the charging station dry reduces the risk of electrical faults developing over time.