SUPEER Robot Lawnmower Garage (Black, 62cm x 90.5cm x 88.8cm)

Will this garage block my robot mower's GPS or Wi-Fi signal?

This is the most important question to answer before buying. Because the garage is made entirely from metal, it can and does block GPS and Wi-Fi signals. At least one verified buyer found their Segway robotic mower was completely unable to navigate once inside. If your mower relies on GPS or Wi-Fi to map and navigate your garden, a metal garage may cause serious problems. Check your mower's technical requirements carefully. Mowers that use a boundary wire system and only need a signal to start a session rather than continuously are generally less affected. If in doubt, contact your mower's manufacturer before purchasing this garage.

What are the exact internal dimensions of the garage?

The overall dimensions are 62cm high x 90.5cm wide x 88.8cm deep. These are the external measurements. The internal usable space will be slightly smaller once the metal panels are accounted for. Most standard robotic mowers with a footprint under 70cm x 70cm should fit comfortably, with room for the docking station as well. Several buyers confirmed there was even space for additional small garden items alongside the mower. Always measure your mower and its docking station before ordering to confirm fit.

Does assembly require any special tools?

No specialist tools are required. The garage arrives with all fixings included and every part is labelled with a number that matches the instruction steps. All nuts and bolts across the entire structure are the same size, which means you only need one spanner or socket size throughout the build. Buyers describe the assembly as straightforward though time-consuming due to the number of screws involved. Set aside a couple of hours and work methodically through the numbered steps. Having a second person to hold panels in place during assembly is helpful but not essential.

Is the garage genuinely weatherproof in the UK climate?

The metal construction and sloped roof design make it well suited to typical UK weather. The sloped roof prevents rainwater from pooling on top, which is the primary cause of rust on flat-roofed metal structures. One buyer specifically noted that an identical unit has been in use on the seafront at Dawlish one of the more exposed coastal locations in England and has held up well. That said, no metal structure is entirely rust-proof indefinitely. Applying a metal protective spray to any cut edges or scratches during assembly is advisable for long-term durability.

Can I run a charging cable into the garage safely?

Yes. The garage includes a dedicated cable entry hole at the rear specifically for this purpose. This allows you to route your mower's charging cable through the back wall so the docking station sits fully inside the shelter. Your mower can dock and recharge with the doors closed, keeping both the mower and the charging equipment protected from rain. This is a significant practical advantage over generic storage solutions that force you to leave doors ajar, which defeats the purpose of weather protection.

How heavy is the garage and can one person install it?

The garage weighs 13kg in total. Individual panels are manageable for one person but having a second person available during assembly makes the process considerably easier, particularly when aligning and holding side panels while fixing the roof sections. The base should be positioned first in its final location before the walls and roof are assembled around it. One buyer specifically recommends placing the base in position first and then building the structure over it to ensure a secure and level installation.

Is the garage lockable?

Multiple buyers have mentioned that the garage is lockable, which is a useful security feature. The hinged double doors at the front can be secured, helping to deter opportunistic theft of your robotic mower. Robotic mowers can represent a significant investment many models cost upwards of £500 so having a lockable shelter adds a practical layer of protection beyond just weather coverage. The exact locking mechanism details are not fully specified in the product listing, so it is worth confirming this with the seller if security is a primary concern for your purchase.

What happens if parts are missing or damaged on arrival?

SUPEER states that their customer service team responds within 24 hours to any queries raised before or after purchase. If parts arrive bent, damaged or missing which a small number of buyers have reported, particularly bent corner sections contacting SUPEER directly is the recommended course of action. Given the garage is sold on Amazon, you also have the standard Amazon buyer protections available to you. It is worth inspecting all parts against the numbered parts list before beginning assembly so that any issues are identified and reported before you start building.